Little Tree Bali - Green Building Centre

• Specifically designed for finished wooden floors
• Suitable for both residential and commercial locations
• Based on polyurethane = superb protective qualities
• Contains no waxes
• Allows future applications of finish, using the Prep System
• Available size is 1 L

1. Rock container back & forth several times before opening. Apply Freshen Up with the Bona Microfiber applicator pad. Prepare the applicator pad by slightly dampening it with water. Apply Freshen Up in a 3-4 cm wide wavy line on the floor. Work on a small section at a time, about 3 m².
2. Spread Freshen Up over entire small section making sure all wood is covered. Freshen Up should be applied at 30-50 m² per litre. For best results, apply a thin consistent coat. Keep airborne dust and airflow to a minimum while floor is wet.
3. Smooth out Freshen Up, going with the grain of the wood. Continue the process until the entire floor is coated. Allow to dry a minimum of 2 hours before walking on coated floors. If needed, a second coat may be applied after this time. Always coat the entire floor to ensure an even appearance and sheen.

Note: Avoid heavy traffic and replacement of furniture and rugs for 24 hours after the final coat. Clean tools with soap and water.

Maintenance

Wetcleaning of the floor may be resumed after one week. For regular cleaning use Bona Cleaner. Do not use strongly alkaline cleaning agents as they may damage the floor.

In contrast to floors treated with polish, wax or similar material, a floor maintained with Freshen Up can still be overcoated with professional finish. Prior to application of finish, the surface must be treated with the Prep System using screen P150 to remove build up from previous applications of Freshen Up. Complement the screen by going in afterwards with the Bona Scrad System P220 to smooth out scratches.

• Binding agent: Polyurethane
• Dilution: Do not dilute – the product is ready to use
• Drying time: Approx. 2 hours (20°C/60% RH)
• Application tools: Bona Microfibre Applicator Pad
• Coverage: Ca. 30–50 m²/L
• Safety: Unclassified
• Shelf life: 2 years, from date of production, in unopened original container
• Storage/Transport: The temperature must not fall below +50°C or exceed +25°C during storage and transport
• Disposal: Wastes and emptied containers should be handled in accordance with local regulations