Little Tree Bali - Green Building Centre

• Energy saving and CO₂ emission reduction since it is solar-powered: no cables, no maintenance and uses replaceable battery
• Lights can be seen from as far as 400 meters 
• Waterproof 
• Embedded into casing, easy to install and difficult to steal
• Bayer Polycarbonate withstands 12+ tons of pressure
• Available models:
• Mushroom Head: comes with a glow in the dark white plastic ring
• Cat’s Eye
• Dome
• Donut

• Drill a hole (5-inch, or 12.7 cm) in diameter and 5 cm in depth
• Clear the debris out of the hole. Ensure that the solar light’s bottom is smooth and will not be damaged by the stones.
• Place the aluminum box first and secure with four M6X70 screws
• Place the color silicon ring on the aluminum box. Remove the magnet on the side of the solar light.
• Place the solar light in the aluminum box. Turn the solar light clockwise with the installation tool.
• Apply the silicon glue and wipe the surface clean
• Ensure that the installation site has more than 4 hours of sunlight on average. Lights should be in direct contact with sunlight and there should be no blockage such as buildings, trees, shadows, etc. to hinder charging.
• Sunlight intensity should be more than 10,000 lux (+/- 3 hours under full sunlight) for better power efficiency
• In case of non-working lights caused by insufficient sunlight or long period of cloudy days, the product will need to be exposed to sunlight to resume operating
• If the product works during daytime, this is due to insufficient power. The light needs to generate more power under the sunlight to reach 1.2V to resume normal state. 
• It is strongly not advised to use the lights along a vehicle pathway

The replaceable battery has 3-5 years lifespan/ Solar panel 20 years/ LED lamp 100,000 hours.